Documented model · check revision
JK-B1A8S-10P
JK-B1A8S10P
Li-ion (ternary/NMC): 3–8S | LiFePO4 (LFP): 3–8S | Lithium titanate (LTO): 7–8S
Standard interfaces: Bluetooth, UART, display interface
Find your JK BMS configuration
Model comparisonOnly documented model data satisfies a filter. Confirm the shipped hardware revision, harness and inverter protocol before ordering.
New to BMS selection?
Start with the cell specification and your actual continuous load. Voltage alone cannot confirm the cell chemistry or series count.
74 configurations
Documented model · check revision
JK-B2A24S30P
JK-B2A24S30P
Li-ion (ternary/NMC): 7–24S | LiFePO4 (LFP): 8–24S | Lithium titanate (LTO): 14–24S
Standard interfaces: Bluetooth, UART, display interface
Documented model · check revision
JK-B2A25S-CR60P
JK-B2A25S-CR60P
Li-ion (ternary/NMC): 7–25S | LiFePO4 (LFP): 8–25S | Lithium titanate (LTO): 14–25S
Standard interfaces: Bluetooth, UART, RS485, CAN, display interface
Documented model · check revision
JK-B2A8S20P
JK-B2A8S20P
Li-ion (ternary/NMC): 3–8S | LiFePO4 (LFP): 3–8S | Lithium titanate (LTO): 7–8S
Standard interfaces: Bluetooth, UART, display interface
Documented model · check revision
JK-BD6A24S10P
JK-BD6A24S10P
Li-ion (ternary/NMC): 7–24S | LiFePO4 (LFP): 8–24S | Lithium titanate (LTO): 14–20S
Standard interfaces: Bluetooth, display interface
Documented model · check revision
JK-BD6A32S-10P
Standard package
Li-ion (ternary/NMC): 7–32S | LiFePO4 (LFP): 8–32S | Lithium titanate (LTO): 14–32S
Standard interfaces: Bluetooth, UART, display interface
Documented model · check revision
JK-BD6A32S-15P
Standard package
Li-ion (ternary/NMC): 7–32S | LiFePO4 (LFP): 8–32S | Lithium titanate (LTO): 14–32S
Standard interfaces: Bluetooth, UART, display interface
Documented model · check revision
JK-PB1A16S-10P
JK-PB1A16S10P
Li-ion (ternary/NMC): 7–16S | LiFePO4 (LFP): 8–16S | Lithium titanate (LTO): 14–16S
Continuous discharge: 100 A
Standard interfaces: Bluetooth, CAN, RS485-1, RS485-2, display interface
Documented model · check revision
JK-PB1A16S-15P
JK-PB1A16S15P
Li-ion (ternary/NMC): 7–16S | LiFePO4 (LFP): 8–16S | Lithium titanate (LTO): 14–16S
Continuous discharge: 150 A
Standard interfaces: Bluetooth, CAN, RS485-1, RS485-2, display interface
Documented model · check revision
JK-PB2A16S-10P
JK-PB2A16S10P
Li-ion (ternary/NMC): 7–16S | LiFePO4 (LFP): 8–16S | Lithium titanate (LTO): 14–16S
Standard interfaces: Bluetooth, CAN, RS485-1, RS485-2, display interface
Documented model · check revision
JK-PB2A16S-15P
JK-PB2A16S15P
Li-ion (ternary/NMC): 7–16S | LiFePO4 (LFP): 8–16S | Lithium titanate (LTO): 14–16S
Continuous discharge: 150 A
Standard interfaces: Bluetooth, CAN, RS485-1, RS485-2, display interface
Documented model · check revision
JK-PB2A16S-30P
JK-PB2A16S30P
Li-ion (ternary/NMC): 7–16S | LiFePO4 (LFP): 8–16S | Lithium titanate (LTO): 14–16S
Continuous discharge: 300 A
Standard interfaces: Bluetooth, CAN, RS485-1, RS485-2, display interface
Documented model · check revision
JK-PB2A16S20P
JK-PB2A16S20P
Li-ion (ternary/NMC): 7–16S | LiFePO4 (LFP): 8–16S | Lithium titanate (LTO): 14–16S
Standard interfaces: Bluetooth, CAN, RS485-1, RS485-2, display interface
0 / 4 selectedCompare 2–4 configurations