Match the product to the battery system
Confirm the exact supported battery string range on the product page. Match the current rating to the actual load and protection design. Confirm the required active-balancing current before choosing a model.
JKBMS Accessories
JKBMS WiFi Remote Monitoring Module
$63.00Изберете конфигурация
WiFi monitoring gateway for compatible JKBMS and JIKONG BMS systems
Детайли за продукта
The JKBMS WiFi Remote Monitoring Module connects a compatible lithium battery management system through TTL or RS485 and makes BMS data available over a 2.4GHz wireless network. Use LAN mode for browser-based local commissioning or WAN mode for supported cloud-based remote monitoring, parameter management, event review, and module firmware upgrades.
1 / 1
Изберете конфигурация
Настройване с телефон- Supply voltage
- 9-90V DC
- WiFi band
- 2.4GHz
- BMS communication
- TTL or RS485; the two interfaces cannot be used simultaneously
- Network modes
- LAN local access and WAN cloud access
- Compatibility note
- Confirm the exact BMS model, firmware, TTL/RS485 interface, pinout, and supplied harness before ordering.
Подробна продуктова информация
Пълен визуален продуктов наръчник
Review the full product illustrations, dimensions, component information, and application notes before selecting a configuration.
РЪКОВОДСТВО ЗА СВЪРЗВАНЕ С ТЕЛЕФОН
Свържете WiFi модула с телефона си
Преди да започнетеСвържете модула със съвместима BMS и включете захранването. За локален достъп изберете режим LAN със страничния превключвател (L1 не свети).
Проверете първоначалното състояние
Едновременното мигане на L2 и L3 означава, че модулът е в първоначалния режим на точка за достъп (AP).
L2 + L3И двата мигатАко не мигат и двата, задръжте бутона на модула за поне 3 секунди, докато L2 и L3 започнат отново да мигат, след което започнете отначало.
Свържете се с точката за достъп на модула
Отворете настройките за WiFi на телефона и се свържете със следните данни:
- Име на WiFi мрежата
JK_BMS_WIFI- Парола за точката за достъп
66666666
След като телефонът се свърже, L3 изгасва, а L2 продължава да мига. Предупреждението „Няма интернет“ е нормално; изберете „Останете свързани“.
Настройте модула в браузъра
Използвайте браузъра на телефона, а не приложението. Докато сте свързани с точката за достъп на модула, отворете
http://192.168.4.1/илиhttp://jkbms.local/.Въведете името и паролата за WiFi мрежата на рутера на 2.4 GHz. Задайте уникално локално име на устройството, например
jkbms123, след което изберете „Прилагане на конфигурацията“.L2 свети постоянно · L3 не светиРутерът е свързанПостоянно светещ L2 и бавно мигащ L3 означават неуспешно свързване с рутера. Задръжте бутона на модула за поне 3 секунди, докато L2 и L3 започнат отново да мигат, след което повторете настройването.
Свържете се отново с рутера и вижте данните
Свържете телефона със същия рутер като модула. В браузъра отворете избраното име, последвано от
.local.Примерен локален адресhttp://jkbms123.local/Вече можете да виждате напрежение, ток, SOC, аларми и групи балансни проводници. Този адрес работи в локалната ви мрежа.
Разрешете промяната на параметри
По подразбиране интерфейсът е само за четене. За промяна на параметри изберете „Настройки за оторизация“ и въведете фабричната парола на BMS
123456. Ако е променена, използвайте текущата парола на BMS.Две различни пароли:
66666666служи за свързване с точката за достъп на модула;123456е фабричната парола за оторизация на BMS.Използвайте облака за отдалечен достъп По избор
За отдалечен достъп изберете режим WAN със страничния превключвател на модула (L1 свети). На телефона или компютъра отворете „WiFi облак“ от навигацията на сайта JKBMS, след което се регистрирайте или влезте.
Облачната платформа предлага управление на устройства, състояние в реално време, исторически графики и настройки на параметри.
Отворете WiFi облакаОтваря се в нов раздел
Детайли за продукта
Обхват на доставката и спецификации
Основни характеристики
- Acquires compatible BMS data through TTL serial or RS485 communication
- LAN mode provides browser-based local monitoring and configuration on the same network
- WAN mode supports remote access through the supported cloud platform
- View real-time battery data, operating status, alarms, and historical information where supported
- Supports parameter configuration and remote module firmware upgrades through the browser interface
- AP mode simplifies first-time setup; STA mode connects the module to a 2.4GHz router
- Status LEDs identify network mode, connection mode, and communication state
- Reset button supports restart and clearing saved WiFi configuration
Включено
- JKBMS WiFi remote monitoring module
- TTL communication harness
- RS485 communication harness
- Product setup documentation
Не е включено
- BMS main unit, battery cells, router, internet connection, and external system hardware
- Onsite installation, network commissioning, or custom cloud integration
- Any adapter or model-specific harness not named in the confirmed packing list
ProductJKBMS WiFi Remote Monitoring Module
ApplicationCompatible lithium battery management systems (BMS)
Supply voltage9-90V DC
Operating power≤450mW at 12V
WiFi band2.4GHz
BMS communicationTTL or RS485; the two interfaces cannot be used simultaneously
Default baud rate115200
Network modesLAN local access and WAN cloud access
WiFi modesAP setup mode and STA router mode
Operating temperature-40 to 80°C
Dimensions60.5 × 60.5 × 12.6 mm
Compatibility noteConfirm the exact BMS model, firmware, TTL/RS485 interface, pinout, and supplied harness before ordering.
SELECTION HELP
Check the system requirements before ordering
MODEL-SPECIFIC APPLICATION NOTES
JKBMS-WiFi selection context
JKBMS-WiFi should be compared as a specific JKBMS accessories product, not only by a copied title or image. The selection should be based on the real battery system, installation space, communication needs, and official quotation or checkout configuration.Application context
JKBMS WiFi Remote Monitoring Module belongs to the JKBMS accessories and is best reviewed for monitoring, display, module, or harness requirements around an existing JKBMS installation.
Use the exact product page to confirm the selected configuration, accessories, and quotation scope for JKBMS-WiFi.
For communication planning, confirm whether the final installation needs Bluetooth, LCD, CAN, RS485, USB, or a model-specific adapter.
Decision checks
- Confirm battery chemistry, cell count, and pack voltage before selecting the product.
- Mechanical planning: reserve space around 60.5 × 60.5 × 12.6 mm, cable exits, airflow, and service access.
- For direct checkout, verify the selected configuration and destination shipping before payment.
- Use www.jkbms.net and zhou@jkbms.net to verify official source, quotation, and bulk purchasing details.
Model planning
Model fit and purchase planning
Use this summary to confirm whether JKBMS WiFi Remote Monitoring Module fits the battery system before checkout, quotation, or installation.
- Primary use
- JKBMS display, monitoring, module, or harness support
- Installation size
- 60.5 × 60.5 × 12.6 mm
Pre-order checks
- JKBMS WiFi Remote Monitoring Module should be checked against the real battery pack, load current, installation space, thermal conditions, and selected accessories before purchase.
- Confirm current rating and protection design from the final product page or written quotation before ordering.
- If the product will connect to an inverter, confirm the exact communication hardware, protocol, and cable requirement before shipment.
- Review balancing requirements separately when the battery pack uses large-capacity cells or has known cell mismatch.
System fit checks
Compatibility, installation, and official purchase checks
Use these checks before selecting a configuration, requesting a quote, or installing the product in a battery system.
Confirm protocol and interface details
For any inverter-connected system, confirm CAN or RS485 requirements, cable wiring, battery limits, master-slave roles, and commissioning settings before shipment.
Plan wiring, mounting, and operating conditions
Reserve space for the listed dimensions: 60.5 × 60.5 × 12.6 mm. Plan the installation around -40 to 80°C operating conditions. Use suitable fusing, cable size, torque, ventilation, insulation, and commissioning checks for the final battery system.
Verify the product and quote channel
Verify this product on https://www.jkbms.net/products/jkbms-wifi-remote-monitoring-module, confirm the official domain is www.jkbms.net, and use zhou@jkbms.net for quotation checks before bulk payment or project procurement.
Product FAQ
JKBMS WiFi Remote Monitoring Module compatibility, configuration and purchase FAQВъпроси и отговори
What is JKBMS WiFi Remote Monitoring Module used for?
JKBMS WiFi Remote Monitoring Module is listed for jkbms accessories. The JKBMS WiFi Remote Monitoring Module connects a compatible lithium battery management system through TTL or RS485 and makes BMS data available over a 2.4GHz wireless network. Use LAN mode for browser-based local commissioning or WAN mode for supported cloud-based remote monitoring, parameter management, event review, and module firmware upgrades.
Is JKBMS WiFi Remote Monitoring Module listed on the official JKBMS website?
JKBMS WiFi Remote Monitoring Module is listed on www.jkbms.net, the official factory website operated by JKBMS Electronic Technology Co.,Ltd. Use https://www.jkbms.net and the official sales email zhou@jkbms.net to verify quotes before payment.
How should I confirm compatibility before ordering JKBMS WiFi Remote Monitoring Module?
Confirm the exact product page specifications, selected configuration, battery-system design, and written quotation before ordering.
What is included with JKBMS WiFi Remote Monitoring Module?
JKBMS WiFi remote monitoring module; TTL communication harness; RS485 communication harness. Not included: BMS main unit, battery cells, router, internet connection, and external system hardware; Onsite installation, network commissioning, or custom cloud integration. The final selected configuration and written quotation remain the reference for supply scope.
How do payment, shipping, and returns work for JKBMS WiFi Remote Monitoring Module?
Purchasable JKBMS products can be ordered from the product page. Verify the model, configuration, destination, and official sales contact before bulk purchasing or project use. Return and shipping rules are published at https://www.jkbms.net/policies.
Technical resources for this modelИзтегляния и поддръжка
- Current product facts — textShare the exact configurations, current prices, evidence and purchase guidance with your buyer or assistant. Confirm the selected package before payment.
- Current product facts — JSONRead the same published model and SKU data in a compact format. Internal store SKUs are not EAN or GTIN barcodes.
- Свържете телефона си с WiFi модула JKBMSШест стъпки за свързване с точката за достъп, настройване в браузъра, локални данни от BMS, оторизация на параметри и облачен достъп по избор, с диагностика по LED.
- WiFi module user guide V1.0 (English PDF)Download the English guide for hotspot connection, browser configuration, local monitoring, parameter authorization and cloud access.
- JKBMS WiFi Remote Monitoring Module manual and wiring diagramsOpen the document library by exact model code and confirm the manual revision before using a wiring diagram.
Get in Touch
Ready to power your future? Contact us for a custom quote or partnership inquiry.
Phone+86 131 6282 8868
WhatsApp
WeChatEmailzhou@jkbms.net
LocationRoom 1008, Building B4, Yunzhi Science & Technology Park, Guangming District, Shenzhen, China
Общо$63.00