6U Rack Battery Enclosure Kit
Worldwide delivery · EU shipping free · Outside EU USD 100 per order
6U enclosure kit only; battery cells and a complete battery pack are not included.
Available for worldwide delivery, with free shipping to European Union addresses and USD 100 shipping per order containing a kit to destinations outside the EU. This listing sells the selected 6U rack battery enclosure and assembly hardware kit only, not a complete battery or ready-to-use battery pack. LiFePO4 battery cells are not included and must be purchased separately. The supported 15kWh capacity applies only after compatible cells are installed. A BMS and 4.3-inch LCD are supplied with the Enclosure + LCD + BMS option. CCS Version includes enclosure kit + LCD + BMS + CCS; its price is pending confirmation. Standard-version specifications below do not describe the CCS revision.
Enclosure kit only. Battery cells and a complete battery pack are not included. Photos may show an assembled system; BMS and LCD are supplied only with the selected bundle.
Enclosure Only
Battery cells are not included.
For a compatible 19-inch rack. Published enclosure dimensions: 715 × 472 × 270 mm. Confirm cell dimensions and terminal positions before ordering.
Check the supplied hardware against the final packing list. Capacity figures describe an assembled system after compatible cells are installed.
Informazioni dettagliate
Review the full product illustrations, dimensions, component information, and application notes before selecting a configuration.
Enclosure kit only. Illustrations may show an assembled battery or application equipment. Battery cells, a complete battery pack, inverter and rack cabinet are not included. BMS and LCD are supplied only with the selected bundle.
CHOOSE YOUR ENCLOSURE
| What to compare | Battery Kit (With Caster) | 6U Battery Kit |
|---|---|---|
| Placement | Movable floor enclosure with caster base | Compatible 19-inch rack (rack cabinet not included) |
| Published enclosure dimensions | 835 × 400 × 280 mm | 715 × 472 × 270 mm |
| Enclosure only | $303.00 | $283.00 |
| Enclosure + LCD + BMS | $403.00 | $383.00 |
| CCS Version · Enclosure kit + LCD + BMS + CCS | Price pending confirmation | Price pending confirmation |
| Battery cells | Not included; source compatible cells separately | Not included; source compatible cells separately |
| Delivery | Worldwide delivery: free EU shipping; USD 100 once per order containing either or both enclosure kits outside the EU, regardless of kit quantity. | Worldwide delivery: free EU shipping; USD 100 once per order containing either or both enclosure kits outside the EU, regardless of kit quantity. |
| EU transit planning estimate | 3–5 business days after dispatch from Poland; processing is separate. Confirm current availability and destination estimate. | 3–5 business days after dispatch from Poland; processing is separate. Confirm current availability and destination estimate. |
Confirm the cell model, dimensions, terminal position and available installation space before ordering. Read the cell-fit and enclosure guide
Dettagli prodotto
SELECTION HELP
Check cell dimensions, installation format, assembled capacity, BMS, LCD, communication, and shipping before ordering.
Read guideCOMMUNICATION GUIDESeparate physical interface choice from inverter protocol and system compatibility requirements.
Read guideMODEL-SPECIFIC APPLICATION NOTES
The 6U rack kit is a priority comparison product for buyers planning cabinet-based LiFePO4 modules. Confirm rack depth, cable exit, airflow, cell dimensions, LCD selection, and BMS selection before ordering.
6U Battery Kit belongs to the JKBMS battery and ESS hardware and is best reviewed for rack-mounted 51.2V LiFePO4 modules where 19-inch cabinet fit and service access matter.
Use the exact product page to confirm the selected configuration, accessories, and quotation scope for 6U Battery Kit.
For communication planning, this page lists CAN 2.0 / RS485 with compatible BMS option; protocol, pinout, cable, firmware, and inverter or service-tool settings still need confirmation.
Model planning
Use this summary to confirm whether 6U Battery Kit fits the battery system before checkout, quotation, or installation.
System fit checks
Use these checks before selecting a configuration, requesting a quote, or installing the product in a battery system.
Use cells that match the listed LiFePO4 compatible requirement. Battery cells, inverter equipment, onsite installation, and external system wiring are not included unless they are named in the selected package. Review the selected enclosure, LCD, and BMS option before checkout.
Communication status: CAN 2.0 / RS485 with compatible BMS option. Confirm protocol, pinout, baud rate or CAN bitrate, firmware, and inverter compatibility before installation.
Reserve space for the listed dimensions: 715 × 472 × 270 mm. Review enclosure or protection details: IP20 indoor enclosure design. Plan the installation around -20°C ~ 60°C, component dependent operating conditions. Use suitable fusing, cable size, torque, ventilation, insulation, and commissioning checks for the final battery system.
Verify this product on https://www.jkbms.net/products/6u-battery-kit, confirm the official domain is www.jkbms.net, and use zhou@jkbms.net for quotation checks before bulk payment or project procurement.
Domande sul prodotto
No. È un kit di contenitore e componenti di assemblaggio; le celle e una batteria completa pronta all’uso non sono incluse. I valori di capacità descrivono una possibile batteria assemblata con celle compatibili acquistate separatamente, non l’energia fornita dal kit.
“Enclosure Only” comprende il contenitore e i componenti interni previsti; BMS e LCD non sono inclusi. “Enclosure + LCD + BMS” aggiunge BMS e LCD. “CCS Version” include contenitore + LCD + BMS + CCS; il prezzo è da confermare. Inverter, caricatore, celle, installazione e cablaggi esterni non sono inclusi, salvo diversa indicazione esplicita. Verifica sempre il pacchetto selezionato e la distinta di imballaggio.
Conferma un rack compatibile da 19 pollici, profondità utile, portata con le celle montate, guide/supporti, spazio per cavi e ventilazione. L’armadio rack esterno non è incluso. Servono anche modello, dimensioni e posizione dei terminali delle celle.
Sì, la consegna è disponibile in tutto il mondo. Per indirizzi UE il costo di spedizione è USD 0; fuori dall’UE è USD 100 una sola volta per ordine contenente uno o entrambi i kit, indipendentemente dalla quantità. Regno Unito, Svizzera e Norvegia non fanno parte dell’UE. Controlla il paese prima del pagamento; eventuali imposte e oneri di importazione non sono garantiti come inclusi.
No. La stima di pianificazione per le spedizioni UE dal magazzino in Polonia è di 3–5 giorni lavorativi dopo la spedizione, non dopo l’ordine. Preparazione dell’ordine, disponibilità, festivi e condizioni del corriere possono incidere sui tempi. Non è una data di arrivo garantita né una conferma di inventario in tempo reale; chiedi conferma per il tuo indirizzo e per le destinazioni fuori UE.
No. Prima dell’ordine conferma il BMS fornito, la corrente richiesta, il modello dell’inverter, il protocollo CAN o RS485, il firmware e il cavo. Un pacchetto con BMS e display non garantisce compatibilità universale con gli inverter.
Ready to power your future? Contact us for a custom quote or partnership inquiry.
WhatsApp
WeChat