JKBMS PRODUCT

JKBMS JK-PB Series

JK BMS V24 PB2A16S15P

150A-class V24 inverter BMS with 2A active balancing, CAN and dual RS485

A JK-PB smart BMS for lithium packs up to 16S, rated at 150 A continuous discharge and 2 A active balancing. Bluetooth, CAN, dual RS485 and display are listed. Use a compatible harness for the installation.

1 / 3
Totale$146.91

Dettagli prodotto

Fornitura e specifiche

Caratteristiche principali

  • V24.0.1 revision: 80V supply ceiling and -40 to 75 C operating range
  • Two-stage overcurrent protection: 300A for 9s, 450A for 2s
  • Chemistry-specific support: 7-16S Li-ion, 8-16S LiFePO4, 14-16S LTO
  • 150A maximum continuous charge and discharge
  • 2A active cell balancing
  • V24 standard interfaces: Bluetooth, CAN, dual RS485 and display
  • V24 standard functions: heating, two dry contacts, parallel current limiting and discharge precharge
  • Unchanged from V19: 300 x 100 x 24 mm, 14 accessories, RS485-2 cascade up to 16 units

Incluso

  • Selected JKBMS smart BMS model or display bundle
  • Model-specific wiring harness and standard accessories supplied with the product
  • Documentation or setup references supplied with the selected package

Non incluso

  • Battery cells, battery enclosure, inverter, charger, and external power cabling
  • External contactors, breakers, fuses, and installation hardware unless specified
  • Onsite installation, commissioning, firmware setup, or inverter configuration service
ModelJK-PB2A16S15P
SeriesJKBMS JK-PB Series
Overcurrent Protection300A for 9s (2x rated) / 450A for 2s (3x rated)
Battery ChemistryLi-ion (ternary/NMC) 7–16S; LiFePO4 (LFP) 8–16S; Lithium titanate (LTO) 14–16S
Series RatingLi-ion 7–16S; LiFePO4 8–16S; Lithium titanate 14–16S
Balance Current2 A active
Continuous Discharge150 A
Supply Voltage20–80 V
Operating Temperature-40°C to 75°C
Standard CommunicationBluetooth, CAN, RS485-1, RS485-2, display interface
DimensionsV24.0.1: 300 × 100 × 24 mm
WeightV24.0.1: 1086 g
Manual RevisionV24.0.1 / V19.0.3

Product resources

Specifications depend on hardware revision. Use a compatible harness and follow the applicable installation instructions.

HARDWARE SPECIFICATIONS

JK-PB2A16S-15P data by hardware revision

The V24.0.1 energy-storage specification lists JK-PB2A16S-15P in the 150 A tier with 2 A active balancing, chemistry-specific cell counts, Bluetooth, CAN, two RS485 channels and a display interface. Compared with V19.0.3 the supply ceiling rises to 80 V, the operating range widens to -40 to 75 C and two-stage overcurrent protection is added. Match the hardware revision before wiring.

Battery compatibility

Chemistry changes the series range

Li-ion (ternary/NMC)
7–16S
LiFePO4 (LFP)
8–16S
Lithium titanate (LTO)
14–16S

Electrical limits

Use the correct rating label

Active balance
2 A
Continuous discharge
150 A
Supply voltage
20–80 V

V24.0.1 section 4.1 lists 150 A as the maximum continuous charge and discharge current for this tier; the effective protection value follows the configured parameters.

Interfaces and functions

Standard is not the same as optional

Standard

Bluetooth · CAN · RS485-1 · RS485-2 · display interface

Additional standard functions

Heating control · Two dry-contact outputs · Parallel current limiting · Discharge precharge

  • CAN and RS485-1 are provided for inverter communication.
  • RS485-2 is used for parallel communication or PC software.
  • Protocol compatibility, cable pinout and inverter settings must be confirmed for the target system.

Mechanical and environment

Match dimensions to the label

V24.0.1
300 × 100 × 24 mm · 1086 g
Operating temperature
-40°C to 75°C
Revision control matters.
  • V24.0.1 lists JK-PB2A16S15P at 150 A maximum continuous charge and discharge current.
  • V24.0.1 raises the supply-voltage ceiling from 70 V to 80 V and widens the operating range from -30 to 70 C to -40 to 75 C.
  • V24.0.1 adds two-stage overcurrent protection: 2x rated current for 9 s and 3x rated current for 2 s.
  • Enclosure dimensions (300 x 100 x 24 mm), the 14-accessory pack and the RS485-2 cascade limit of 16 units are unchanged from V19.0.3.
  • Default parameter tables are identical apart from item 26, where the discharge precharge time changes to 3 s.
  • V19 and V24 wiring, connectors and harnesses must not be mixed by assumption.

TECHNICAL DOCUMENTS

Product manuals

Documentation review recorded 2026-11-18. Technical facts apply only to the named document and hardware revisions; this is not a manufacturing date.

Browse the official technical library →

Before ordering

Four details that prevent the wrong configuration

  1. Photograph the product label or confirm the exact hardware/manual revision.
  2. Provide battery chemistry, series count and expected charge/discharge demand.
  3. Provide the inverter brand and model, required CAN or RS485 protocol, and parallel-pack plan.
  4. Confirm display, communication cable, heating, dry-contact and precharge requirements in the order.

MODEL-SPECIFIC APPLICATION NOTES

JK-PB2A16S-15P selection context

JK-PB2A16S-15P should be compared as a specific JK-PB series product, not only by a copied title or image. The selection should be based on the real battery system, installation space, communication needs, and official quotation or checkout configuration.
Why this model matters

V24.0.1 hardware differs from V19.0.3 in supply ceiling, temperature range and overcurrent behaviour. Confirm the label and do not assume V19 harnesses, protection settings or default parameters carry over.

Application context

JK BMS V24 PB2A16S15P belongs to the JK-PB series and is best reviewed for 48V-class storage batteries and inverter-connected LiFePO4 systems.

The listed battery string range is Li-ion (ternary/NMC) 7–16S; LiFePO4 (LFP) 8–16S; Lithium titanate (LTO) 14–16S. The current reference is 150 A. The active-balancing reference is 2 A active.

For communication planning, this page lists Standard: Bluetooth, CAN, RS485-1, RS485-2, display interface; protocol, pinout, cable, firmware, and inverter or service-tool settings still need confirmation.

Decision checks

  • Battery chemistry or cell fit: Li-ion (ternary/NMC) 7–16S; LiFePO4 (LFP) 8–16S; Lithium titanate (LTO) 14–16S.
  • Mechanical planning: reserve space around V24.0.1: 300 × 100 × 24 mm, cable exits, airflow, and service access.
  • The product page lists the available configurations and accessories for direct checkout.
  • Use www.jkbms.net and zhou@jkbms.net to verify official source, quotation, and bulk purchasing details.

Model planning

Model fit and purchase planning

Use this summary to confirm whether JK BMS V24 PB2A16S15P fits the battery system before checkout, quotation, or installation.

Model
JK-PB2A16S-15P
Primary use
Inverter-connected LiFePO4 storage batteries
Battery strings
Li-ion (ternary/NMC) 7–16S; LiFePO4 (LFP) 8–16S; Lithium titanate (LTO) 14–16S
Current reference
150 A
Active balancing
2 A active
Communication
Standard: Bluetooth, CAN, RS485-1, RS485-2, display interface
Installation size
V24.0.1: 300 × 100 × 24 mm

Selection details

  • JK BMS V24 PB2A16S15P should be checked against the real battery pack, load current, installation space, thermal conditions, and selected accessories before purchase.
  • The listed 150 A current reference must be matched with cable size, terminals, fuse or breaker, battery cells, thermal design, and expected inverter demand.
  • The listed communication options are Standard: Bluetooth, CAN, RS485-1, RS485-2, display interface; protocol, pinout, firmware, and inverter compatibility still need project-level confirmation.
  • The 2 A active balancing specification is one selection factor and does not replace matched cells, correct wiring, or suitable charging settings.

System fit checks

Compatibility, installation, and official purchase checks

Use these checks before selecting a configuration, requesting a quote, or installing the product in a battery system.

Compatibility

Match the product to the battery system

Confirm the battery pack is within Li-ion (ternary/NMC) 7–16S; LiFePO4 (LFP) 8–16S; Lithium titanate (LTO) 14–16S. Match the 150 A current reference to the inverter, load, wiring, protection, and thermal design. Use the 2 A active active-balancing class as one selection input, not as a substitute for good cell matching.

Communication

Confirm protocol and interface details

Communication status: Standard: Bluetooth, CAN, RS485-1, RS485-2, display interface. Confirm protocol, pinout, baud rate or CAN bitrate, firmware, and inverter compatibility before installation.

Installation

Plan wiring, mounting, and operating conditions

Reserve space for the listed dimensions: V24.0.1: 300 × 100 × 24 mm. Plan the installation around -40°C to 75°C operating conditions. Use suitable fusing, cable size, torque, ventilation, insulation, and commissioning checks for the final battery system.

Official source

Verify the product and quote channel

Verify this product on https://www.jkbms.net/products/jkbms-v24-jk-pb2a16s15p-inverter-bms-16s-150a-2a-active-balance, confirm the official domain is www.jkbms.net, and use zhou@jkbms.net for quotation checks before bulk payment or project procurement.

Domande sul prodotto

JK-PB2A16S-15P: compatibilità, configurazione e acquistoDomande e risposte

Come scelgo il BMS corretto per la mia batteria?

Specifica chimica, numero esatto di celle in serie, corrente continua di carica e scarica e picchi con la loro durata. Poi verifica corrente di bilanciamento, spazio, dissipazione, inverter, revisione hardware e cablaggio. Non dedurre la compatibilità dalla sola tensione nominale, dal nome della serie o dall’aspetto del connettore.

Posso aggiungere lo schermo da 4,3 pollici e il modulo WiFi?

Sì. Nel catalogo attuale sono disponibili come opzioni per questo BMS: puoi sceglierne una o entrambe. Ogni accessorio selezionato viene fornito nella quantità di uno per BMS; uno schermo già incluso nel pacchetto selezionato non viene addebitato due volte. Adattatore e cablaggio devono essere compatibili con il BMS e lo schermo.

Se scelgo due accessori, lo sconto diventa del 10%?

No. Selezionando uno schermo o il modulo WiFi, lo sconto è del 5% una sola volta sul BMS e su questi accessori. Due accessori non raddoppiano lo sconto. I costi H/C/R/P non attivano lo sconto e vengono aggiunti interamente dopo lo sconto.

Questo BMS può essere ordinato con lo schermo da 7 pollici?

Sì. Questa pagina appartiene alla serie PB, per la quale è prevista l’opzione da 7 pollici. Adattatore e cablaggio dello schermo devono essere compatibili con il BMS.

Posso aggiungere riscaldamento, CAN e RS485 e quanto costano?

H indica l’interfaccia di riscaldamento, C indica CAN e R indica RS485. Tutti i modelli della serie PB includono H, CAN e RS485 di serie. Il B2A32S-RP include CAN e RS485 di serie e offre H come opzione. Le funzioni incluse non richiedono selezione o costi aggiuntivi. Ogni funzione non inclusa costa USD 1 per BMS. Le funzioni già incluse nel modello non vengono offerte né addebitate di nuovo. Il modello finale conserva le lettere esistenti e aggiunge solo quelle delle nuove opzioni, nell’ordine H, C, R, conservando l’eventuale suffisso PB. I costi delle opzioni si aggiungono dopo l’eventuale sconto del 5% e non lo attivano. Modello, revisione hardware, protocollo applicativo e cablaggio devono essere compatibili con l’inverter.

La presenza di CAN o RS485 garantisce la compatibilità con il mio inverter?

No. La compatibilità dipende da inverter e BMS, revisione hardware, protocollo applicativo, firmware, la piedinatura, il cavo e le impostazioni. Una scelta sul sito o un connettore simile non dimostrano che i due dispositivi possano comunicare.

RELATED PRODUCTS

Review nearby models in the same product family before confirming strings, current rating, balancing, display, or communication requirements.

Get in Touch

Ready to power your future? Contact us for a custom quote or partnership inquiry.

LocationRoom 1008, Building B4, Yunzhi Science & Technology Park, Guangming District, Shenzhen, China

Con il consenso, JKBMS registra categorie di provenienza e fasi di acquisto per un massimo di 90 giorni. Un riepilogo della provenienza può essere salvato con l’ordine. Statistiche facoltative su visite e acquisti.

Consenti cookie pubblicitari Google e identificatori dei clic per attribuire acquisti agli annunci. Richiede il consenso alle statistiche. Non vengono inviati nomi, contatti o indirizzi. La personalizzazione degli annunci resta disattivata.

Informativa sulla privacy