Battery compatibility
Chemistry changes the series range
- Li-ion (ternary/NMC)
- 7–16S
- LiFePO4 (LFP)
- 8–16S
- Lithium titanate (LTO)
- 14–16S
JKBMS PRODUCT
JKBMS JK-PB Series
200A-class V24 inverter BMS with 2A active balancing, CAN and dual RS485
A JK-PB smart BMS for lithium packs up to 16S, rated at 200 A continuous discharge and 2 A active balancing. Bluetooth, CAN, dual RS485 and display are listed. Use a compatible harness for the installation.
Szczegóły produktu
Specifications depend on hardware revision. Use a compatible harness and follow the applicable installation instructions.
HARDWARE SPECIFICATIONS
The V24.0.1 energy-storage specification lists JK-PB2A16S-20P in the 200 A tier with 2 A active balancing, chemistry-specific cell counts, Bluetooth, CAN, two RS485 channels and a display interface. Compared with V19.0.3 the supply ceiling rises to 80 V, the operating range widens to -40 to 75 C and two-stage overcurrent protection is added. Match the hardware revision before wiring.
Battery compatibility
Electrical limits
V24.0.1 section 4.1 lists 200 A as the maximum continuous charge and discharge current for this tier; the effective protection value follows the configured parameters.
Interfaces and functions
Bluetooth · CAN · RS485-1 · RS485-2 · display interface
Heating control · Two dry-contact outputs · Parallel current limiting · Discharge precharge
Mechanical and environment
TECHNICAL DOCUMENTS
Documentation review recorded 2026-11-18. Technical facts apply only to the named document and hardware revisions; this is not a manufacturing date.
Before ordering
MODEL-SPECIFIC APPLICATION NOTES
V24.0.1 hardware differs from V19.0.3 in supply ceiling, temperature range and overcurrent behaviour. Confirm the label and do not assume V19 harnesses, protection settings or default parameters carry over.
JK BMS V24 PB2A16S20P belongs to the JK-PB series and is best reviewed for 48V-class storage batteries and inverter-connected LiFePO4 systems.
The listed battery string range is Li-ion (ternary/NMC) 7–16S; LiFePO4 (LFP) 8–16S; Lithium titanate (LTO) 14–16S. The current reference is 200 A. The active-balancing reference is 2 A active.
For communication planning, this page lists Standard: Bluetooth, CAN, RS485-1, RS485-2, display interface; protocol, pinout, cable, firmware, and inverter or service-tool settings still need confirmation.
Model planning
Use this summary to confirm whether JK BMS V24 PB2A16S20P fits the battery system before checkout, quotation, or installation.
System fit checks
Use these checks before selecting a configuration, requesting a quote, or installing the product in a battery system.
Confirm the battery pack is within Li-ion (ternary/NMC) 7–16S; LiFePO4 (LFP) 8–16S; Lithium titanate (LTO) 14–16S. Match the 200 A current reference to the inverter, load, wiring, protection, and thermal design. Use the 2 A active active-balancing class as one selection input, not as a substitute for good cell matching.
Communication status: Standard: Bluetooth, CAN, RS485-1, RS485-2, display interface. Confirm protocol, pinout, baud rate or CAN bitrate, firmware, and inverter compatibility before installation.
Reserve space for the listed dimensions: V24.0.1: 300 × 100 × 24 mm. Plan the installation around -40°C to 75°C operating conditions. Use suitable fusing, cable size, torque, ventilation, insulation, and commissioning checks for the final battery system.
Verify this product on https://www.jkbms.net/products/jkbms-v24-jk-pb2a16s20p-inverter-bms-16s-200a-2a-active-balance, confirm the official domain is www.jkbms.net, and use zhou@jkbms.net for quotation checks before bulk payment or project procurement.
Product FAQ
Provide the chemistry, exact series count, continuous charge and discharge current, and peak current with its duration. Then check balancing current, installation space, cooling, inverter, hardware revision and matched wiring. Nominal voltage, a series name or a similar connector alone does not establish compatibility.
Yes. The current catalogue offers these options for this BMS, independently or together. Each selected accessory is supplied once per BMS; a display already included in the selected package is not charged twice. The adapter and harness must be compatible with the BMS and display.
No. Selecting a display or WiFi applies the 5% discount once to the BMS and those accessories. Two accessories do not double the discount. H/C/R/P feature fees do not trigger or receive the discount and are added in full afterwards.
Yes. This page belongs to the PB series, which offers the 7-inch display option. The display adapter and harness must be compatible with the BMS.
H means heating interface, C means CAN and R means RS485. All PB-series models include H, CAN and RS485 as standard. B2A32S-RP includes CAN and RS485 as standard, with H available as an option. Included features require no selection or extra charge. Each feature not already included costs USD 1 per BMS. Features included in the model are not offered or charged again. The final model retains existing feature letters and adds only newly selected options in H, C, R order, preserving any existing PB suffix. Option fees are added after any 5% bundle discount and do not trigger it. The model, hardware revision, application protocol and harness must suit your inverter.
No. Compatibility depends on the inverter and BMS, hardware revision, application protocol, firmware, pinout, cable and settings. A website selection or a matching connector does not prove that the two devices can communicate.
The V24.0.1 manual lists 7-16S for ternary/NMC lithium, 8-16S for LiFePO4 and 14-16S for LTO. Select by chemistry as well as series count.
V24.0.1 raises the supply-voltage ceiling from 70 V to 80 V, widens the operating range to -40 to 75 C, adds two-stage overcurrent protection at 2x and 3x rated current, and moves the discharge precharge time to 3 s. Enclosure dimensions, the accessory pack and parallel behaviour are unchanged.
Yes. V24.0.1 section 4.1 lists 200 A as the maximum continuous charge and discharge current for this tier. The effective protection value follows the parameters configured on the unit.
For the V24.0.1 configuration, Bluetooth, CAN, two RS485 channels and a display interface are listed as standard. CAN and RS485-1 serve inverter communication; RS485-2 serves parallel communication or PC software. Protocol and cable compatibility still require confirmation.
Do not assume so. V19 and V24 connectors, wiring and harness definitions must be matched to the actual hardware revision before connection.
Ready to power your future? Contact us for a custom quote or partnership inquiry.
WhatsApp
WeChat