JKBMS JK-BD Series
JKBMS JK-BD4A20S6P Smart Active Balance BMS
BD smart BMS with active balancing for higher-voltage lithium packs$78.88View product
JKBMS JK-BD Series
JK-BD4A20S8P
$85.59Välj konfiguration
1 / 2
- Selected model
- JK-BD4A20S8P
- Maximum discharge (not continuous)
- 80 A
- Active balance
- 0.4 A
- Documented standard interfaces
- Bluetooth, UART, display interface
- Configuration
- Standard package
- Maximum charge
- 80 A
Selected SKU facts
- Selected model
- JK-BD4A20S8P
- Configuration
- Standard package
- Active balance
- 0.4 A
- Maximum charge
- 80 A
- Maximum discharge (not continuous)
- 80 A
- Documented standard interfaces
- Bluetooth, UART, display interface
- Specification basis
- JK BD4AxxS 6P 8P User Manual V19.0.1 (19.0.1)
Manual data is revision-specific. Confirm the shipped label and harness before wiring.
Detaljerad produktinformation
Product overview
Produktinformation
Leveransomfattning och specifikationer
Viktiga funktioner
- Active balance: 0.4 A
- Maximum charge: 80 A
- Maximum discharge (not continuous): 80 A
- Documented standard interfaces: Bluetooth, UART, display interface
Ingår
- Selected configuration: Standard package
- Exact harness and supplied items require confirmation against the packing list.
Ingår inte
- Battery cells, battery enclosure, inverter, charger, and external power cabling
- External contactors, breakers, fuses, and installation hardware unless specified
- Onsite installation, commissioning, firmware setup, or inverter configuration service
Selected modelJK-BD4A20S8P
ConfigurationStandard package
Active balance0.4 A
Maximum charge80 A
Maximum discharge (not continuous)80 A
Documented standard interfacesBluetooth, UART, display interface
Specification basisJK BD4AxxS 6P 8P User Manual V19.0.1 (19.0.1)
TECHNICAL SPECIFICATIONS
JK-BD4A20S8P parameter details
Hardware revisions and optional interfaces may differ; confirm the supplied revision before wiring or changing protection settings. Some parameters require confirmation; see the qualifications and confirmation items in the model chart.
View specifications as text
| Selected model | JK-BD4A20S8P |
|---|---|
| Configuration | Standard package |
| Active balance | 0.4 A |
| Maximum charge | 80 A |
| Maximum discharge (not continuous) | 80 A |
| Documented standard interfaces | Bluetooth, UART, display interface |
| Specification basis | JK BD4AxxS 6P 8P User Manual V19.0.1 (19.0.1) |
Exact-model verificationNedladdningar och support
No exact-model manual association is confirmed for the selected configuration.
Product FAQ
JKBMS JK-BD4A20S8P Smart Active Balance BMS compatibility, configuration and purchase FAQFrågor och svar
How do I choose the correct BMS for my battery?
Provide the chemistry, exact series count, continuous charge and discharge current, and peak current with its duration. Then check balancing current, installation space, cooling, inverter, hardware revision and matched wiring. Nominal voltage, a series name or a similar connector alone does not establish compatibility.
Can I add a 4.3-inch display and WiFi module to this BMS?
Yes. The current catalogue offers these options for this BMS, independently or together. Each selected accessory is supplied once per BMS; a display already included in the selected package is not charged twice. Confirm the adapter and harness for the supplied hardware revision.
Do two selected accessories give a 10% discount?
No. Selecting a display or WiFi applies the 5% discount once to the BMS and those accessories. Two accessories do not double the discount. H/C/R feature fees do not trigger or receive the discount and are added in full afterwards.
Can this BMS be ordered with a 7-inch display?
The 7-inch display option is limited to the PB series and is not offered for this BMS. Use the display choices listed on this page and confirm the adapter and harness.
Can I add heating, CAN and RS485, and what do they cost?
H means heating interface, C means CAN and R means RS485. All PB-series models and B2A32S-RP include CAN and RS485 as standard: no selection or extra charge is needed. Each feature not already included costs USD 1 per BMS. Features included in the model are not offered or charged again. The final model retains existing feature letters and adds only newly selected options in H, C, R order, preserving any existing PB suffix. Option fees are added after any 5% bundle discount and do not trigger it. Confirm the model, hardware revision, application protocol and harness for your inverter.
Does CAN or RS485 guarantee compatibility with my inverter?
No. Confirm the exact inverter and BMS models, hardware revision, application protocol, firmware, pinout, cable and settings. A website selection or a matching connector does not prove that the two devices can communicate.
Get in Touch
Ready to power your future? Contact us for a custom quote or partnership inquiry.
Phone+86 131 6282 8868
WhatsApp
WeChatEmailzhou@jkbms.net
LocationRoom 1008, Building B4, Yunzhi Science & Technology Park, Guangming District, Shenzhen, China
Totalt$85.59