Match the product to the battery system
Confirm the exact supported battery string range on the product page. Match the current rating to the actual load and protection design. Confirm the required active-balancing current before choosing a model.
1 / 2JKBMS JK-B1A / B2A Series
JKBMS JK-B2A20S20P Smart Active Balance BMS
Current-revision specifications require factory confirmation
Technical specifications for the exact current JK-B2A20S20P hardware revision are being confirmed. Before ordering, provide the battery chemistry, series count, expected current duty, required communication interface and a product-label photo so the factory can match the correct manual, dimensions and harness.
- Model
- JK-B2A20S20P
- Technical status
- Current revision requires factory confirmation
Choose configuration
Selected configuration$181.96
Shipping is calculated by destination during checkout. PayPal verifies and captures the final amount securely.
TECHNICAL VERIFICATION STATUS
Current hardware revision requires factory confirmation
An exact-model public technical manual was not found in the verified documentation set. Current-revision specifications must be confirmed by the factory before this listing is treated as manual-verified.
Provide before ordering
- Provide battery chemistry, series count and expected current duty.
- State the required Bluetooth, display, CAN or RS485 interface.
- Request the current manual revision and provide a product-label photo before wiring.
- Confirm dimensions, weight, supply voltage and the exact harness in writing.
Why this page is cautious
- Do not infer technical parameters from a nearby B2A family model or a discontinued B2AxxS20PCC document.
- Certification materials that merely list the model are not used as a technical specification.
Send the information to zhou@jkbms.net so the factory can match the exact manual and harness.
Product details
Supply scope and specifications
Key features
- Exact current hardware revision must be matched before technical approval
- Battery chemistry and series count require written factory confirmation
- Communication interface, protocol, connector and harness require confirmation
- Dimensions, supply voltage and current limits must come from the matched manual
Included
- Selected JKBMS smart BMS model or display bundle
- Model-specific wiring harness and standard accessories supplied with the product
- Documentation or setup references supplied with the selected package
Not included
- Battery cells, battery enclosure, inverter, charger, and external power cabling
- External contactors, breakers, fuses, and installation hardware unless specified
- Onsite installation, commissioning, firmware setup, or inverter configuration service
ModelJK-B2A20S20P
SeriesJKBMS JK-B1A / B2A Series
Verification StatusExact current hardware revision requires factory confirmation
Required Before OrderBattery chemistry, series count, current duty, interface, product label, manual revision and harness
Detailed product information
Complete visual product guide
Review the full product illustrations, dimensions, component information, and application notes before selecting a configuration.
SELECTION HELP
Check the system requirements before ordering
SELECTION GUIDE
How to choose a JKBMS
Check strings, current, active balancing, display, and communication requirements before comparing models.
Read guideBALANCING GUIDE1A vs 2A active balancing
Understand how balance-current class relates to cell capacity, imbalance, and correction time.
Read guideCOMMUNICATION GUIDECAN vs RS485 for a BMS
Separate physical interface choice from inverter protocol and system compatibility requirements.
Read guideMODEL-SPECIFIC APPLICATION NOTES
JK-B2A20S20P selection context
JK-B2A20S20P should be compared as a specific JK-B2A series product, not only by a copied title or image. The selection should be based on the real battery system, installation space, communication needs, and official quotation or checkout configuration.Why this model matters
This listing is not presented as manual-verified for the exact current hardware revision. Request the matching manual and written factory confirmation before payment or wiring.
Application context
JKBMS JK-B2A20S20P Smart Active Balance BMS belongs to the JK-B2A series and is best reviewed for compact lithium packs where active balancing, current rating, and app monitoring are key selection inputs.
Use the exact product page to confirm the selected configuration, accessories, and quotation scope for JK-B2A20S20P.
For communication planning, confirm whether the final installation needs Bluetooth, LCD, CAN, RS485, USB, or a model-specific adapter.
Decision checks
- Confirm battery chemistry, cell count, and pack voltage before selecting the product.
- Confirm mounting position, cable exit, airflow, and service access in the final enclosure.
- For direct checkout, verify the selected configuration and destination shipping before payment.
- Use www.jkbms.net and zhou@jkbms.net to verify official source, quotation, and bulk purchasing details.
Model planning
Model fit and purchase planning
Use this summary to confirm whether JKBMS JK-B2A20S20P Smart Active Balance BMS fits the battery system before checkout, quotation, or installation.
- Model
- JK-B2A20S20P
- Primary use
- Smart active-balance BMS for compact lithium packs
Pre-order checks
- JKBMS JK-B2A20S20P Smart Active Balance BMS should be checked against the real battery pack, load current, installation space, thermal conditions, and selected accessories before purchase.
- Confirm current rating and protection design from the final product page or written quotation before ordering.
- If the product will connect to an inverter, confirm the exact communication hardware, protocol, and cable requirement before shipment.
- Review balancing requirements separately when the battery pack uses large-capacity cells or has known cell mismatch.
System fit checks
Compatibility, installation, and official purchase checks
Use these checks before selecting a configuration, requesting a quote, or installing the product in a battery system.
Confirm protocol and interface details
The current hardware revision, communication interface, harness and pinout require factory confirmation.
Plan wiring, mounting, and operating conditions
Use suitable fusing, cable size, torque, ventilation, insulation, and commissioning checks for the final battery system.
Verify the product and quote channel
Verify this product on https://www.jkbms.net/products/jkbms-jk-b2a20s20p-smart-bms-200a-20s-active-balancer, confirm the official domain is www.jkbms.net, and use zhou@jkbms.net for quotation checks before bulk payment or project procurement.
Product FAQ
JK-B2A20S20P manual, wiring and compatibility FAQ
Are the JK-B2A20S20P technical specifications manual-verified?
Not yet for the exact current hardware revision. Ask the factory to match the current manual and product label before relying on cell-count, current, communication, dimensions or harness claims.
What information is needed before ordering JK-B2A20S20P?
Provide battery chemistry, series count, expected charge/discharge duty, required communication interface and a product-label or revision photo. The factory should confirm the matching manual and harness.
Is JKBMS JK-B2A20S20P Smart Active Balance BMS listed on the official JKBMS website?
JKBMS JK-B2A20S20P Smart Active Balance BMS is listed on www.jkbms.net, the official factory website operated by JKBMS Electronic Technology Co.,Ltd. Use https://www.jkbms.net and the official sales email zhou@jkbms.net to verify quotes before payment.
What is included with JKBMS JK-B2A20S20P Smart Active Balance BMS?
Selected JKBMS smart BMS model or display bundle; Model-specific wiring harness and standard accessories supplied with the product; Documentation or setup references supplied with the selected package. Not included: Battery cells, battery enclosure, inverter, charger, and external power cabling; External contactors, breakers, fuses, and installation hardware unless specified. The final selected configuration and written quotation remain the reference for supply scope.
How do payment, shipping, and returns work for JKBMS JK-B2A20S20P Smart Active Balance BMS?
Purchasable JKBMS products can be ordered from the product page. Verify the model, configuration, destination, and official sales contact before bulk purchasing or project use. Return and shipping rules are published at https://www.jkbms.net/policies.
Technical resources for this model
- How to verify the correct JK-B2A20S20P manual and wiringNo exact controlled manual is currently published for this listing. Do not substitute a nearby PCC or 24S manual; ask the factory to match the label and hardware revision.
- JK-B2A20S20P protocol and wiring verificationConfirm the exact hardware revision, interface and harness before using any pinout or inverter protocol table.
- Compare JK-B2A20S20P with nearby JKBMS modelsCompare documented battery range, current, balancing, communication and manual status in one table.
Get in Touch
Ready to power your future? Contact us for a custom quote or partnership inquiry.
Phone+86 131 6282 8868
WhatsApp
WeChatEmailzhou@jkbms.net
LocationRoom 1008, Building B4, Yunzhi Science & Technology Park, Guangming District, Shenzhen, China