Match the product to the battery system
Confirm the exact supported battery string range on the product page. Match the current rating to the actual load and protection design. Confirm the required active-balancing current before choosing a model.
1 / 5JKBMS Accessories
JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS
Accessory: 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS
JKBMS 2" LCD display shows SOC, voltage, current & fault codes. Built-in switch controls BMS & display on/off. Compatible with all JKBMS Smart BMS. Plug-and-play.
- Model
- JK-LCD2.0
- Communication
- CAN
- Series
- JKBMS Accessories
- Selection Note
- Confirm the exact hardware suffix, battery chemistry, cell count, current duty, connector, harness, firmware, and communication protocol before ordering.
Choose configuration
Selected configuration$15.68
Shipping is calculated by destination during checkout. PayPal verifies and captures the final amount securely.
Product details
Supply scope and specifications
Key features
- Model: JK-LCD2.0
- JKBMS-compatible monitoring, alarm, repair, display, or installation accessory
- Use only with the confirmed BMS model, connector, voltage, and communication interface
- Check the product images and final packing list before ordering
Included
- The selected JKBMS accessory model
- Connector lead or accessory parts supplied with that exact model
- Basic supplier packing
Not included
- BMS main unit, battery cells, inverter, charger, and external system hardware
- Installation, parameter setup, firmware work, or compatibility debugging
- Any cable, adapter, display, or module not named in the selected product option
ModelJK-LCD2.0
SeriesJKBMS Accessories
CommunicationCAN
Selection NoteConfirm the exact hardware suffix, battery chemistry, cell count, current duty, connector, harness, firmware, and communication protocol before ordering.
SELECTION HELP
Check the system requirements before ordering
MODEL-SPECIFIC APPLICATION NOTES
JK-LCD2.0 selection context
JK-LCD2.0 should be compared as a specific JKBMS accessories product, not only by a copied title or image. The selection should be based on the real battery system, installation space, communication needs, and official quotation or checkout configuration.Application context
JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS belongs to the JKBMS accessories and is best reviewed for monitoring, display, module, or harness requirements around an existing JKBMS installation.
Use the exact product page to confirm the selected configuration, accessories, and quotation scope for JK-LCD2.0.
For communication planning, this page lists CAN; protocol, pinout, cable, firmware, and inverter or service-tool settings still need confirmation.
Decision checks
- Confirm battery chemistry, cell count, and pack voltage before selecting the product.
- Confirm mounting position, cable exit, airflow, and service access in the final enclosure.
- For direct checkout, verify the selected configuration and destination shipping before payment.
- Use www.jkbms.net and zhou@jkbms.net to verify official source, quotation, and bulk purchasing details.
Model planning
Model fit and purchase planning
Use this summary to confirm whether JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS fits the battery system before checkout, quotation, or installation.
- Model
- JK-LCD2.0
- Primary use
- JKBMS display, monitoring, module, or harness support
- Communication
- CAN
Pre-order checks
- JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS should be checked against the real battery pack, load current, installation space, thermal conditions, and selected accessories before purchase.
- Confirm current rating and protection design from the final product page or written quotation before ordering.
- The listed communication options are CAN; protocol, pinout, firmware, and inverter compatibility still need project-level confirmation.
- Review balancing requirements separately when the battery pack uses large-capacity cells or has known cell mismatch.
System fit checks
Compatibility, installation, and official purchase checks
Use these checks before selecting a configuration, requesting a quote, or installing the product in a battery system.
Confirm protocol and interface details
Communication status: CAN. Confirm protocol, pinout, baud rate or CAN bitrate, firmware, and inverter compatibility before installation.
Plan wiring, mounting, and operating conditions
Use suitable fusing, cable size, torque, ventilation, insulation, and commissioning checks for the final battery system.
Verify the product and quote channel
Verify this product on https://www.jkbms.net/products/jkbms-jk-lcd2-active-switch-display, confirm the official domain is www.jkbms.net, and use zhou@jkbms.net for quotation checks before bulk payment or project procurement.
Product FAQ
JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS manual, wiring and compatibility FAQ
What is JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS used for?
JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS is listed for jkbms accessories. JKBMS 2" LCD display shows SOC, voltage, current & fault codes. Built-in switch controls BMS & display on/off. Compatible with all JKBMS Smart BMS. Plug-and-play.
Is JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS listed on the official JKBMS website?
JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS is listed on www.jkbms.net, the official factory website operated by JKBMS Electronic Technology Co.,Ltd. Use https://www.jkbms.net and the official sales email zhou@jkbms.net to verify quotes before payment.
How should I confirm compatibility before ordering JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS?
Confirm model JK-LCD2.0, communication CAN against the battery pack, inverter, wiring, and project requirements before ordering.
What is included with JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS?
The selected JKBMS accessory model; Connector lead or accessory parts supplied with that exact model; Basic supplier packing. Not included: BMS main unit, battery cells, inverter, charger, and external system hardware; Installation, parameter setup, firmware work, or compatibility debugging. The final selected configuration and written quotation remain the reference for supply scope.
How do payment, shipping, and returns work for JKBMS 2 Inch LCD Display with Active Switch — BMS Monitor & Power Control for JKBMS Smart BMS?
Purchasable JKBMS products can be ordered from the product page. Verify the model, configuration, destination, and official sales contact before bulk purchasing or project use. Return and shipping rules are published at https://www.jkbms.net/policies.
Technical resources for this model
- JK-LCD2.0 manual and wiring diagramsOpen the document library by exact model code and confirm the manual revision before using a wiring diagram.
Get in Touch
Ready to power your future? Contact us for a custom quote or partnership inquiry.
Phone+86 131 6282 8868
WhatsApp
WeChatEmailzhou@jkbms.net
LocationRoom 1008, Building B4, Yunzhi Science & Technology Park, Guangming District, Shenzhen, China