JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board official JKBMS main product image

1 / 5

JKBMS Accessories

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board

Accessory for JKBMS monitoring, display, communication, or parallel operation

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board is a JKBMS accessory listed from $9.98. Use it to complete monitoring, display, interface, or parallel-module requirements after confirming compatibility with the installed BMS model.

Model: P-LINK-CR
Series: JKBMS Accessories
Selection note: Confirm compatibility with the target JKBMS model, connector, cell count, and system voltage before ordering.

Choose configuration

Selected configuration$9.98

Shipping is calculated by destination during checkout. PayPal verifies and captures the final amount securely.

Product details

Supply scope and specifications

Key features

JKBMS-compatible accessory
Supports monitoring, display, communication, or parallel operation depending on model
Selected by target BMS model and connector type
Useful for service, installation, or system expansion

Included

Selected JKBMS accessory model
Standard connector or accessory parts supplied with that model
Basic product packing from the supplier

Not included

BMS main unit, inverter, battery cells, and external system hardware
Installation, firmware update, parameter setup, or compatibility debugging service
Any adapter, cable, or accessory not named in the selected product option

ModelP-LINK-CR

SeriesJKBMS Accessories

Selection noteConfirm compatibility with the target JKBMS model, connector, cell count, and system voltage before ordering.

SELECTION HELP

Check the system requirements before ordering

Technical guides help narrow the product and configuration. The exact product specifications, written quotation, and compatibility confirmation remain the final reference.

SELECTION GUIDE

How to choose a JKBMS

Check strings, current, active balancing, display, and communication requirements before comparing models.

Read guide COMMUNICATION GUIDE

CAN vs RS485 for a BMS

Separate physical interface choice from inverter protocol and system compatibility requirements.

Read guide

MODEL-SPECIFIC APPLICATION NOTES

P-LINK-CR selection context

P-LINK-CR should be compared as a specific JKBMS accessories product, not only by a copied title or image. The selection should be based on the real battery system, installation space, communication needs, and official quotation or checkout configuration.

Application context

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board belongs to the JKBMS accessories and is best reviewed for monitoring, display, module, or harness requirements around an existing JKBMS installation.

Use the exact product page to confirm the selected configuration, accessories, and quotation scope for P-LINK-CR.

For communication planning, confirm whether the final installation needs Bluetooth, LCD, CAN, RS485, USB, or a model-specific adapter.

Decision checks

Confirm battery chemistry, cell count, and pack voltage before selecting the product.
Confirm mounting position, cable exit, airflow, and service access in the final enclosure.
For direct checkout, verify the selected configuration and destination shipping before payment.
Use www.jkbms.net and zhou@jkbms.net to verify official source, quotation, and bulk purchasing details.

JKBMS official LiFePO4 BMS Model index

Model planning

Model fit and purchase planning

Use this summary to confirm whether JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board fits the battery system before checkout, quotation, or installation.

Model: P-LINK-CR
Primary use: JKBMS display, monitoring, module, or harness support

Pre-order checks

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board should be checked against the real battery pack, load current, installation space, thermal conditions, and selected accessories before purchase.
Confirm current rating and protection design from the final product page or written quotation before ordering.
If the product will connect to an inverter, confirm the exact communication hardware, protocol, and cable requirement before shipment.
Review balancing requirements separately when the battery pack uses large-capacity cells or has known cell mismatch.

Official website verificationVerify www.jkbms.net, company identity, and official sales contact.JKBMS selection guideNarrow the catalog by strings, current, balancing, and communication.JKBMS model indexCompare model families, string ranges, current ratings, and communication.

System fit checks

Compatibility, installation, and official purchase checks

Use these checks before selecting a configuration, requesting a quote, or installing the product in a battery system.

Compatibility

Match the product to the battery system

Confirm the exact supported battery string range on the product page. Match the current rating to the actual load and protection design. Confirm the required active-balancing current before choosing a model.

Communication

Confirm protocol and interface details

For any inverter-connected system, confirm CAN or RS485 requirements, cable wiring, battery limits, master-slave roles, and commissioning settings before shipment.

Installation

Plan wiring, mounting, and operating conditions

Use suitable fusing, cable size, torque, ventilation, insulation, and commissioning checks for the final battery system.

Official source

Verify the product and quote channel

Verify this product on https://www.jkbms.net/products/jkbms-jikong-p-link-cr-rs485-interface-board-jkbms-parallel, confirm the official domain is www.jkbms.net, and use zhou@jkbms.net for quotation checks before bulk payment or project procurement.

Product FAQ

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board manual, wiring and compatibility FAQ

What is JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board used for?

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board is listed for jkbms accessories. JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board is a JKBMS accessory listed from $9.98. Use it to complete monitoring, display, interface, or parallel-module requirements after confirming compatibility with the installed BMS model.

Is JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board listed on the official JKBMS website?

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board is listed on www.jkbms.net, the official factory website operated by JKBMS Electronic Technology Co.,Ltd. Use https://www.jkbms.net and the official sales email zhou@jkbms.net to verify quotes before payment.

How should I confirm compatibility before ordering JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board?

Confirm model P-LINK-CR against the battery pack, inverter, wiring, and project requirements before ordering.

What is included with JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board?

Selected JKBMS accessory model; Standard connector or accessory parts supplied with that model; Basic product packing from the supplier. Not included: BMS main unit, inverter, battery cells, and external system hardware; Installation, firmware update, parameter setup, or compatibility debugging service. The final selected configuration and written quotation remain the reference for supply scope.

How do payment, shipping, and returns work for JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board?

Purchasable JKBMS products can be ordered from the product page. Verify the model, configuration, destination, and official sales contact before bulk purchasing or project use. Return and shipping rules are published at https://www.jkbms.net/policies.

Technical resources for this model

P-LINK-CR manual and wiring diagramsOpen the document library by exact model code and confirm the manual revision before using a wiring diagram.

Get in Touch

Ready to power your future? Contact us for a custom quote or partnership inquiry.

Phone+86 131 6282 8868

WeChat

Emailzhou@jkbms.net

LocationRoom 1008, Building B4, Yunzhi Science & Technology Park, Guangming District, Shenzhen, China

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board